2004 Chrysler Pt Cruiser

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Rear position lamp(s) has a product on the lens but not adversely affecting light output lens broken (1.1.A.3d)

Offside Front Lower engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear coil springs corroded

Supplementary Restraint System warning lamp does not illuminate covered with tape (5.4.2)

oil leaks

Front Battery insecure (1.9.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Rear position lamp(s) has a product on the lens but not adversely affecting light output lens broken (1.1.A.3d)

Offside Front Lower engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear coil springs corroded

oil leaks

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Oil leak

Play in steering rack inner joint(s)

Under-trays fitted obscuring some underside components

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Stop lamp not working (1.2.1b)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Oil leak

Play in steering rack inner joint(s)

Under-trays fitted obscuring some underside components

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Oil leak

Front Direction indicator incorrect colour (1.4.A.2f)

Front Front position lamp(s) not working (1.1.A.3b)

Nearside Outer Front Track rod end ball joint has excessive play (2.2.B.1f)

Rear Brake pipe excessively corroded (3.6.B.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake lever has little reserve travel (3.1.6b)

Offside Front Bonded suspension unit damaged but can function as intended (2.4.F.3)

Nearside Front Bonded suspension unit damaged but can function as intended (2.4.F.3)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear anti-roll bar bushes slight wear

Nearside Front Anti-roll bar attachment bracket/mounting nut missing (2.4.G.1)

Nearside Headlamp aim too low (1.8)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Headlamp aim too low (1.8)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear anti-roll bar bushes slight wear

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both wipers poor condition

long travel hand brake lever

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both wipers poor condition

long travel hand brake lever

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear Stop lamp not working (1.2.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Direction indicator slightly discoloured (1.4.A.2f)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

corrosion rear brake hose ferrules

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

corrosion rear brake hose ferrules

slight bind o/s rear brake

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)