2007 Honda CG125

Exhaust noisy (8.1.1 (a))

drive chain corroded. not excessively

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Exhaust noisy (8.1.1 (a))

Chain guard missing ()

All direction indicators missing (4.4.1 (a) (ii))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Fork yoke modification unsafe no front mud guard or brace (2.2.2 (e))

Front Brake component insecure reaction bracket locking device missing (1.1.21 (c))

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Rear Brake component insecure split pin missing in reaction rod (1.1.21 (c))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear reflector missing (4.8.2 (a) (ii))

Chain guard missing ()

Indicator tell tale missing (4.9.1 (a) (i))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

main beam tell tale missing.

Rear Position lamp not working (4.2.1 (a))

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

front tyre misshaped

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Horn missing (1.7.1)

Offside Rear Direction indicators not working (1.5.1c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Stop lamp does not illuminate immediately a brake applies foot control (1.3.1a)

Stop lamp does not illuminate immediately a brake applies front control (1.3.1a)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

front tyre misshaped

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Plate brake test indicates a binding brake (3.3.B1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Handlebar deformed (2.1.1b)

Headlamp aim too high and too far to the left. (1.6)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)