2009 Yamaha XC125

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Rear Outer panel loose

Headlamp aim too low (4.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Rear Outer panel loose

Front Brake component slightly loose brake hose flexi mounting (1.1.21 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Headlamp lens slightly defective faded (4.1.1 (b) (i))

Front engine coverings damaged

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Mudguard insecure

Front Direction indicator lens defective which has no effect on emitted light tape on lens both sides (4.4.1 (b) (i))

Front Headlamp lens slightly defective faded (4.1.1 (b) (i))

Front Headlamp light intensity reduced (4.1.4 (a))

engine plastic coverings damaged

side stand stiff

Front Direction indicator lens defective which has no effect on emitted light tape on lens both sides (4.4.1 (b) (i))

Front Headlamp lens slightly defective faded (4.1.1 (b) (i))

Front Headlamp light intensity reduced (4.1.4 (a))

Rear Registration plate insecure (0.1 (a))

engine plastic coverings damaged

side stand stiff

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Wheel alignment slightly misaligned (2.4 (a))

Horn not working (7.7 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Wheel alignment slightly misaligned (2.4 (a))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel alignment slightly misaligned. (2.5.1)

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Steering headbearing has slight free play (2.2.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Steering headbearing has slight free play (2.2.2)

Front Wheel alignment slightly misaligned. (2.5.1)

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Horn not working (1.7.3a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Steering headbearing has slight free play (2.2.2)

Front Wheel alignment slightly misaligned. (2.5.1)

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Stop lamp remains on when the brake is released (1.3.1e)