2011 Kia Ceed

Front Drive shaft joint constant velocity boot severely deteriorated Both front driveshaft boots perishing (6.1.7 (g) (i))

Nearside Front Side repeater slightly discoloured (4.4.3 (a))

Nearside Front Suspension arm corroded but not seriously weakened Front bush perishing however still returning (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement NSR trailing arm bush perishing (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Both rear spring arm bushes perishing (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Lower Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bushes perishing (5.3.4 (a) (i))

Stop lamp(s) non-obligatory stop lamp not working High level brake light inop (4.3.1 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Lower Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bushes perishing (5.3.4 (a) (i))

Stop lamp(s) non-obligatory stop lamp not working High level brake light inop (4.3.1 (a) (ii))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Parking brake only just met requirements

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Outer Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear parking brake low on performance

Offside Rear Parking (secondary brake) grabbing slightly (1.3.1 (c))

both rear tyres distorted

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

both rear tyres distorted

Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

n/s/f bottom ball joint dust cover split, still preventing the ingress of dirt

o/s/r tyre wearing low.

Front tyres wearing low and o/s/r

Rear brakes wearing low

Emissions to clean to register on D.S.M

Both rear tyres wearing unevenly on inside edge of the tread, but is not considered to be primary tread for the purpose of the mot.