1999 Mazda MX-5

corrosion to under body

various areas of surface corrosion

Horn not working no horn control (7.7 (a) (ii))

Offside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Steering wheel has movement relative to the column indicating looseness (2.2.1 (a) (i))

Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a) (i))

Central Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))

Nearside Front Outer sill area corroded

Offside Front Inner wheel arch area corroded

Suspension components (general) have surface corrosion

Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Central Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Outer sill area corroded

Offside Front Inner wheel arch area corroded

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension components (general) have surface corrosion

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner arch (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill end (2.4.A.3)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is excessively corroded inner arch (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill end (2.4.A.3)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear fog lamp not working (1.3.2b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Headlamps matched pair are not the same shape (1.7.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill end (2.4.A.3)

Nearside front brake binding (3.7.B.1)

Offside Rear coil spring broken (2.4.C.1a)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

all suspension components corroded

n/s/f wing lower mount corroded

all four coil springs and all suspension components have slight corrosion

Front Brake pad(s) wearing thin (3.5.1g)

all four coil springs and all suspension components corroded

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Rear registration plate margin less than the minimum requirement (6.3.4g)

front reg plate starting to deteriorate

see previous vt32

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Brake pad(s) wearing thin (3.5.1g)

nearside rear tyre devoid of tread on inside edge