2003 Aprilia RX50

Front Brake disc(s) excessively worn (3.2.A1l)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Headlamp aim too high (1.6)

Nearside Rear Direction indicator not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear reflector on motorcycle missing (1.4.1)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Fuel cap sealing washer missing (7.2.2c) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Rear Tyre fouling another component (4.1.4) DANGEROUS

Exhaust noisy (7.1.2)

Drive chain worn but not considered excessive (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel spoke slightly loose. (4.2.1b)

Front wheel bearings are slightly rough (2.3.5b)

Gearbox mounting defective

Rear Wheel spoke slightly corroded. (4.2.1b)

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

Steering movement slightly stiff (2.2.1a)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Chain guard missing

Clutch lever shortened. (6.2.1g)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Exhaust mounting deteriorated. (7.1.1.c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension lightly rubbing not affecting the movement of the suspension (2.3.6a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front wheel bearings have excessive free play (2.3.5b)

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Rear Tyre valve stem misaligned which could cause sudden tyre deflation (4.1.2c) DANGEROUS

Rear shock absorber has inadequate damping effect. (2.4.A.3b) DANGEROUS

Chain guard missing

Clutch lever shortened. (6.2.1g)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Exhaust mounting deteriorated. (7.1.1.c)

Front Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)

Front Tyre worn close to the legal limit (4.1.3(i))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Front Front suspension assembly component loose (2.3.1)

Front Front suspension assembly component loose (2.3.1)

Front Front wheel bearings have excessive free play (2.3.5b)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Advise no plate maybe illegal

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Front mudguard can easily contact any fixed point of the motor bicycle. (2.3.7)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too high and too far to the left. (1.6)

Nearside Front Direction indicator incorrect colour (1.5.1b)

Offside Front Direction indicator incorrect colour (1.5.1b)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Chain guard missing

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Front wheel bearings have slight free play (2.3.5b)

Offside Front shock absorber has light misting of stanchion (2.3.3)