2003 Piaggio Zip

bolt missing from lower exhaust mount.

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Steering headbearing has excessive free play (2.2.2)

Steering movement excessively rough with the weight on the lower bearing (2.2.1a)

Nail in front tyre

bolt missing from lower exhaust mount.

Steering headbearing has slight free play (2.2.2)

Steering movement slightly rough. (2.2.1a)

An item not tested (Manual)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim too high (1.6)

Steering headbearing has slight free play (2.2.2)

Steering movement slightly rough. (2.2.1a)

unable to start bike to test exhaust.

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too high (1.6)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Offside Front Direction indicator not working (1.5.1c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

ignition switch intermitant.

seat lock broken.

Steering movement slightly 'notchy' (2.2.1a)

seat lock not working.

Front Floor brake test indicates a binding brake (3.3.C2c)

Steering movement slightly 'notchy' (2.2.1a)

seat lock not working.

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Fuel cap sealing washer missing (7.2.2c)

Nearside Front Direction indicator not working (1.5.1c)

Rear Brake lever cannot be released smoothly (3.1.3d)

Rear Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b) DANGEROUS

Steering movement slightly 'notchy' (2.2.1a)

front brake binding slightly.

seat lock not working.

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Horn not working (1.7.3a)