MOT Status
ValidMileage
136,928 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Nearside Headlamp aim unable to be tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output Beam image just visible (4.1.4 (b))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement most front bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded nearside and offside (5.3.1 (b) (i))
Nearside Front Suspension arm pin or bush excessively worn Most front bush (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Bonnet release lever broken, still readily opens
Front Brake pad(s) wearing thin nearside and offside - pad wear indicator about to touch disc (1.1.13 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output Beam image just visible (4.1.4 (b))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Fuel filler pipe corroded
Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement most front bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded nearside and offside (5.3.1 (b) (i))
Brake pedal wearing smooth (1.1.2 (c))
Exhaust noisy
Fuel filler neck corroded
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Brake hose mounting corroded
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Inner Brake pad scrapper shim very close to disc
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material Wheel arch area (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
bonnet release lever defective - Can still be opened
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Side repeater missing (4.4.1 (a) (ii))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Brake pedal wearing smooth (1.1.2 (c))
Exhaust noisy
Fuel filler neck corroded
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Brake hose mounting corroded
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Inner Brake pad scrapper shim very close to disc
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material Wheel arch area (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
bonnet release lever defective - Can still be opened
Exhaust noisy (8.1.1 (a))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Brake pipe/hose mounting corroded, not excessive.
Nearside Rear Caliper hand brake lever not returning to its stop
Nearside Rear Fuel hose deteriorated Filler neck (6.1.3 (c) (ii))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre slightly damaged Inner wall (5.2.3 (d) (ii))
Rear Coil spring corroded Both Nearside and Offside (5.3.1 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Exhaust noisy (8.1.1 (a))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Brake pipe/hose mounting corroded, not excessive.
Nearside Rear Caliper hand brake lever not returning to its stop
Nearside Rear Fuel hose deteriorated Filler neck (6.1.3 (c) (ii))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre slightly damaged Inner wall (5.2.3 (d) (ii))
Rear Coil spring corroded Both Nearside and Offside (5.3.1 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear brake pipe mounting slightly corroded
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
bonnet handle broken
Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS
Offside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear brake pipe mounting slightly corroded
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
bonnet handle broken
surface corrosion
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
surface corrosion
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
surface corrosion
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear fog lamp not working (1.3.2b)
inner sills corroded
offside front brake slightly binding
offside front drop link in a poor condition
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
inner sills corroded
offside front brake slightly binding
offside front drop link in a poor condition
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside rear side skirt adrift
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Headlamp aim too low and too far to the right. (1.8)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside rear side skirt adrift
Rear fog lamp not working (1.3.2b)
front and rear brake pads getting thin
cover sills fitted
wear rear brake pads
both front wiper blades starting to split
front pads low
near side rear tyre worn on inner edge
How Reliable is the Honda Civic?
Based on 9,391,580 MOT tests across 693,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LJ04 VZE is a 2004 Honda Civic in Silver with a 1,998cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2004 Honda Civic models, the average MOT pass rate is 74.2% with a typical mileage of 74,453 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Civic fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 307,913 recorded failures. If you're considering buying LJ04 VZE, it's worth having these areas checked by a mechanic before committing.
The Honda Civic typically stays on UK roads for around 34 years. At 22 years old, this Honda Civic is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of LJ04 VZE?
You can check the full history of LJ04 VZE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LJ04 VZE registered?
LJ04 VZE is a 2004 Honda Civic, first registered on 1 July 2004.
Is LJ04 VZE safe to buy?
The MOT history for LJ04 VZE shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LJ04 VZE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LJ04 VZE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.