2005 Piaggio Vespa

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp lens slightly defective (4.1.1 (b) (i))

Headlamp light intensity reduced (4.1.4 (a))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Rear wheel bearings are slightly rough (2.4.A.2c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

exhaust is deteriorating

headlight lens is damaged

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

exhaust is deteriorating

headlight lens is damaged

Exhaust is leaking and excessively noisey (7.1.1b)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))