2005 Piaggio Vespa

Headlamp aim too high (4.1.2 (a))

Brake lever has insufficient reserve travel Rear brake (1.1.2 (a))

Fuel system component leaking (6.1.3 (b) (i))

Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Lower sub frame to engine mount excessively corroded (6.1.1 (c) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering operation restricted in free movement from lock to lock No Steering stops fitted (2.1.4 (c))

Brake has no recorded effort at a wheel Rear brake (1.2.1 (a) (ii)) DANGEROUS

Brake pad(s) less than 1.0 mm thick Front pads (1.1.13 (a)) DANGEROUS

Stop lamp remains on when the brakes are released Rear brake (4.3.2 (a) (iii)) DANGEROUS

Tyre tread depth is below minimum requirements of 1.0mm Rear tyre badly worn (5.2.3 (e)) DANGEROUS

Brake disc worn, pitted or scored, but not seriously weakened Front disc corroded (1.1.14 (a) (ii))

Front fairing access panel missing

Play to rear wheel hub

Riders seat slightly loose Seat hinge corroded (6.2.5 (a) (ii))

Road spring corroded Front suspension spring/shock corroded (5.3.1 (b) (i))

Shock absorber has a light misting of oil Rear shock (5.3.2 (b))

Motorcycle structure is corroded but structural rigidity is not significantly reduced foot board underneath (6.1.1 (c) (i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Front suspension has inadequate damping effect. (2.3.6c)

Rear Rear suspension bush has excessive free play (2.4.A2a(i))