2005 Suzuki Gn 125

Headlamp aim too high (4.1.2 (a))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Drive chain sprocket carrier worn but not considered excessive cush drive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1b)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Drive chain sprocket worn to excess (6.2.1e)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Drive chain sprocket worn to excess (6.2.1e)

Drive chain slightly tight (6.2.1d)

Drive chain sprocket carrier worn but not considered excessive cush drive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1b)

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Handlebar deformed (2.1.1b)

Handlebar mounting clamp loose (2.1.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1b)