2007 Yamaha XT 660 X

Registration plate does not conform to the specified requirements (0.1 (d))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain sprocket worn to excess (6.2.1e)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Drive chain sprocket worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too low (1.6)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))