2016 Yamaha Yzf

Drive chain worn to excess (6.1.7 (c) (i))

Front Drive chain sprocket worn to excess (6.1.7 (c) (i))

Headlamp aim too low and too far to the left (4.1.2 (a))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

CLUTCH STIFF

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Nearside Handlebar deformed but serviceable L/H HANDLEBAR BENT (2.2.1 (c) (i))

Rear Brake binding but not excessively (1.2.1 (f))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Rear Brake binding but not excessively (1.2.1 (f))

Offside Rear Lower Exhaust noisy Advise Exhaust Noisy (8.1.1 (a))

Central Rear Lower Registration plate lamp missing in the case of a single lamp or all lamps Number Plate Lamp Missing (4.7.1 (b) (ii))

Nearside Rear Lower Drive chain excessively loose Drive Chain Loose (6.1.7 (c) (i))

Offside Front Upper Direction indicator likely to become detached O/S/F indicator insecure (4.4.1 (c) (ii))

Offside Front Upper Tyre tread depth is below minimum requirements of 1.0mm Tread N/S of front tyre below 1 mm (5.2.3 (e)) DANGEROUS

Offside Rear Lower Exhaust noisy Advise Exhaust Noise (8.1.1 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front fairing missaligned.

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Offside Handlebar fouling on the fuel tank or bodywork on full lock steering stop missing. (2.1.4 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front fairing missaligned.

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))