2003 Aprilia RS125

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Brake pad(s) close to minimum limit inner (1.1.13 (a))

Rear number plate broken

Brake performance not tested (1.2.1 (g))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Wheel spindle loose (5.2.1 (c) (i))

Rear Tyre has ply or cord exposed (5.2.3 (d) (ii)) DANGEROUS

Rear number plate broken

Central Front slight cracking both tyres

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Central Front slight cracking both tyres

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Drive chain slightly loose (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Drive chain slightly loose (6.2.1d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain fouling another component (6.2.1d)

Nearside Front Handlebar mounting clamp bolt loose (2.1.1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Bodywork has several fixings missing but is still secure

Front suspension assembly has slight free play between the sliding members (2.3.4)

Offside Rear Direction indicator damaged but function not impaired (1.5.3a)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear light/number plate fixing panel loose but still secure

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear suspension bearing has slight free play (2.4.A2a(i))

Rear suspension bush has slight free play (2.4.A2a(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Front Direction indicator not working (1.5.1c)

Bodywork has several fixings missing but is still secure

Front suspension assembly has slight free play between the sliding members (2.3.4)

Offside Rear Direction indicator damaged but function not impaired (1.5.3a)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear light/number plate fixing panel loose but still secure

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear suspension bearing has slight free play (2.4.A2a(i))

Rear suspension bush has slight free play (2.4.A2a(i))

Front Front position lamp adversely affected by the operation of another lamp (1.1.3b)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Front position lamp flickers when tapped lightly by hand (1.1.3c)

Front Front wheel bearings are excessively rough (2.3.5b)

Rear Rear suspension bearing has excessive free play (2.4.A2a(i))