2004 Aprilia RX50

Brake lever has inadequate reserve travel (3.1.3b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Exhaust noisy (7.1.2)

Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Decelerometer brake test neither brake control achieves an efficiency of 25% (3.3.E1c)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Direction indicators not working (1.5.1c)

Front Horn not working (1.7.3a)

Nearside Indicator switch does not operate the direction indicators on the side selected (1.5.4)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Direction indicators not working (1.5.1c)

Rear Drive chain worn to excess (6.2.1e)

Rear Exhaust is leaking and excessively noisey (7.1.1b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Drive chain excessively loose (6.2.1d)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Brake pedal is damaged but the brake can still be readily applied (3.1.3c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Rear position lamp deteriorated but function not impaired (1.1.1b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Footrest missing (6.2.1a)

Fuel cap sealing washer missing (7.2.2c)

Headlamp main beam affected by the operation of another lamp (1.2.2c)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Rear wheel spindle loose (2.4.A.2b) DANGEROUS

Brake pedal is damaged but the brake can still be readily applied (3.1.3c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Front Tyre tread not clearly visible (4.1.3(i))

Nearside Rear Direction indicator insecure (1.5.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread not clearly visible (4.1.3(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate incorrect (6.3.1a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)