2004 BMW Z4

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material at flexy hose (1.1.11 (c))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Brake pipe corroded, covered in grease or other material at flexy hose (1.1.11 (c))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material at flexy hose (1.1.11 (c))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Brake pipe corroded, covered in grease or other material at flexy hose (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Brake pipe excessively corroded front to rear at rear (1.1.11 (c))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Brake pipe excessively corroded front to rear at rear (1.1.11 (c))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

engine covers and under trays fitted obscuring some underside components

Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Front Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Headlamp aim too high (4.1.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

Offside Front Suspension arm has slight play in a pin/bearing (2.4.G.2)

Offside Rear Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

nearside rear tyre sidwall damaged

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)