2005 Yamaha Ybr 125

Handlebar deformed but serviceable (2.2.1 (c) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear reflector missing (4.8.2 (a) (ii))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Wheel alignment slightly misaligned (2.4 (a))

Rear Indicator tell tale inoperative bulb replaced (4.9.1 (a) (i))

Front Exhaust has a major leak of exhaust gases exhaust gasket blown (6.1.2 (a))

Front Headlamp aim too low (4.1.2 (a))

Rear Brake rod insecure (1.1.15 (c))

Rear Indicator tell tale inoperative bulb replaced (4.9.1 (a) (i))

Exhaust excessively deteriorated (7.1.1a)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Headlamp aim too low (1.6)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension component excessively corroded. swinging arm (2.4.A.1a)

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension assembly slightly corroded. fork legs (2.3.1)

foot plate rubber missing

Front suspension assembly slightly corroded. fork legs (2.3.1)

Steering movement slightly 'notchy' (2.2.1b)

Drive chain worn but not considered excessive (6.2.1e)

Steering movement slightly 'notchy' (2.2.1a)

Nearside Front Direction indicator incorrect colour (1.5.1b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Drive chain worn but not considered excessive (6.2.1e)

Steering movement slightly 'notchy' (2.2.1a)

Front suspension assembly slightly corroded. (2.3.1)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn to excess (6.2.1e)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Front suspension assembly slightly corroded. (2.3.1)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))