2008 Piaggio Vespa

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Nearside Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a))

Headlamp insecure (4.1.1 (c))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))

Front Brake disc(s) slightly scored (3.2.A1l)

Front suspension has a slightly reduced damping effect (2.3.6c)

Exhaust is leaking and excessively noisey rotten (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too high (1.6)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii)) DANGEROUS

Rear Brake lever has inadequate reserve travel (3.1.3b) DANGEROUS

Front Brake disc(s) slightly scored (3.2.A1l)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Brake cable excessively corroded seizing (3.2.A1b)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

rear tyre on legal limit