2006 Peugeot 107

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement splits in bushes (5.3.4 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement splits in bushes (5.3.4 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension locking device missing ball joint (5.3.6 (b))

Offside Front Suspension locking device missing ball joint (5.3.6 (b))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement splits in bushes (5.3.4 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement splits in bushes (5.3.4 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Brake pipe corroded, covered in grease or other material underside rear (1.1.11 (c))

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

rear axle corroded

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component corroded but not seriously weakened n/s and o/s rear suspension component and rear axle (5.3.3 (b) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component corroded but not seriously weakened n/s and o/s rear suspension component and rear axle (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Prevent Further Corrosion Of Underside

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At Axle Mount Marked (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Prevent Further Corrosion Of Underside

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))