2003 Yamaha YQ50

Front Position lamp damaged but function not impaired (4.2.1 (c) (ii))

Front Upper Wheel alignment slightly misaligned (2.4 (a))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear rear exhaust is a sports but quiet in noise

Rear rear tyre has minimal cracks but is not exposing any cracks

Front Tyre worn close to the legal limit (4.1.3(i))

Rear Exhaust mounting deteriorated. (7.1.1.c)

Rear Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Fairings insecure and likely to impede the steering (2.1.2e)

Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Lower Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Front Upper Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Front Tyre worn close to the legal limit (4.1.3(i))

Rear Exhaust mounting deteriorated. (7.1.1.c)

Rear Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake master cylinder leaking hydraulic fluid (3.2.B1e)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Steering headbearing has excessive free play (2.2.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear suspension bush has slight free play (2.4.A2a(i))

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Steering headbearing has slight free play (2.2.2)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Throttle operating incorrectly (6.2.1f)

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Steering headbearing has slight free play (2.2.2)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Direction indicator insecure (1.5.3b)

Front Brake disc(s) excessively worn (3.2.A1l) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Rear Brake disc(s) excessively worn (3.2.A1l) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Tyre valve stem slightly damaged (4.1.2c)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Stop lamp remains on when the brake is released (1.3.1e)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) excessively worn (3.2.A1l)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Front Headlamp switch insecure (1.2.4)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1a)

nail in tyre