2003 Suzuki GZ125

Drive chain slightly loose (6.2.1d)

Brake lining(s) close to minimum limit rear brake on max ejustment (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Rear Direction indicators not working white light should be orange (1.5.1c)

Brake lining(s) close to minimum limit rear brake on max ejustment (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain sprocket slightly worn (6.2.1e)

Exhaust noisy (7.1.2)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front position lamp insecure (1.1.1c)

Front wheel insecure (4.2.3b)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust noisy (7.1.2)

Rear Exhaust noisy (7.1.2)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Brake reaction bracket insecure (3.2.A1j)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Rear Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not working (1.7.3a)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

front tyre cracked in tread

unable to test headlight aim

Headlamp aim too low (1.6)

Rear brake cable bare & fouling frame.

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Wheel alignment slightly misaligned. (2.5.1)

handlebars bent,but not fouling any component