2003 Aprilia RS125

Headlamp insecure (1.2.3b)

Headlamp switch faulty (1.2.4)

Offside Front Handlebar mounting clamp loose (2.1.1a)

Position lamp switch faulty (1.1.4a)

Brake pedal pivots slightly worn (3.1.3a)

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Gear linkage worn

Nearside Footrest insecure (6.2.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain excessively loose (6.2.1d)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Stop lamp remains on when the brake is released (1.3.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front Direction indicators not working (1.5.1c)

Offside Front Direction indicators not working (1.5.1c)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Drive chain sprocket carrier worn to excess (6.2.1e)

Rear Roller brake test indicates a severely juddering brake (3.3.A1b)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear position lamp adversely affected by the operation of another lamp (1.1.3b)

Riders seat insecure (6.2.1a)

Stop lamp affected by the operation of another lamp (1.3.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Offside Lower Fairings insecure but not likely to impede the steering (2.1.2e)

clutch not releasing correctley[dragging]

nearside mirror missing

offside rear footrest siezed

rear brake lever return spring missing/

Headlamp slightly discoloured (1.2.1)

Nearside Position lamp switch insecure (1.1.4b)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Brake pedal has inadequate reserve travel (3.1.3b)

Drive chain excessively tight (6.2.1d)

Headlamp incorrect colour (1.2.1)

Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Nearside Front Direction indicator incorrect colour (1.5.1b)

Nearside Front Direction indicator not working (1.5.1c)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Brake performance not tested (3.3)

Front Brake lever mounting insecure (3.1.2a)

Rear Brake caliper(s) insecure (3.2.A1j)

Rear Brake caliper(s) securing bolt(s) missing (3.2.A1j)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Throttle operating incorrectly (6.2.1f)

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Front wheel bearings are slightly rough (2.3.5b)