MOT Status
ExpiredMileage
177,209 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen washer not working (3.5 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Body component corroded and likely to cause injury door corroded (6.2.1 (a) (i))
Offside Front Body component damaged and likely to cause injury Broken glass (6.2.1 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Anti-roll bar ball joint dust cover severely deteriorated both side (5.3.4 (b) (i))
Front Brake hose slightly deteriorated both side (1.1.12 (b) (ii))
Front Headlamp lens slightly defective both side (4.1.1 (b) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced both side (6.1.1 (c) (i))
both side sills in poor condition
front and rear both side suspension mounting area slightly corroded
headlights have a poor beam pattern
nearside front sill corroded and poor condition
Tyre worn close to legal limit/worn on edge all (5.2.3 (e))
Nearside Rear Position lamp not working (4.2.1 (a))
Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Tyre worn close to legal limit/worn on edge all (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Direction indicators incorrect colour (1.4.A.2f)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Rear Direction indicators incorrect colour (1.4.A.2f)
Offside rear brake recording little or no effort (3.7.B.5a)
Anti-roll bar has slight play in a pin/bush both front and rear d-bushs (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit on limit (4.1.E.1)
Nearside Rear Anti-roll bar has slight play in a pin/bush d-bush (2.4.G.2)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Anti-roll bar has slight play in a pin/bush d-bush (2.4.G.2)
Offside Rear Front constant velocity joint gaiter damaged, but preventing the ingress of dirt temp repair (2.5.C.1a)
Oil leak ()
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Rear fog lamp not working (1.3.2b)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Parking brake lever has little reserve travel (3.1.6b)
Front Headlamp aim too low (1.8)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Steering system slightly tight (2.2.D.1)
slight imbalance in front brakes
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Steering system slightly tight (2.2.D.1)
slight imbalance in front brakes
damage to nearside front wheel
Offside Headlamp not working on dipped beam (1.7.5a)
Rear Seat belt locking mechanism does not secure or release (5.2.5a)
damage to nearside front wheel
How Reliable is the Mercedes-benz Viano?
Based on 134,814 MOT tests across 8,421 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LK04 WYY is a 2004 Mercedes-benz Viano in Black with a 3,199cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 62.1%.
Across all 2004 Mercedes-benz Viano models, the average MOT pass rate is 71.0% with a typical mileage of 102,610 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Viano fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 2,410 recorded failures. If you're considering buying LK04 WYY, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Viano typically stays on UK roads for around 22 years. At 22 years old, this Mercedes-benz Viano is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of LK04 WYY?
You can check the full history of LK04 WYY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LK04 WYY registered?
LK04 WYY is a 2004 Mercedes-benz Viano, first registered on 26 May 2004.
Is LK04 WYY safe to buy?
The MOT history for LK04 WYY shows 29 tests with a 62.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LK04 WYY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LK04 WYY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.