2005 BMW X3

Oil leak, but not excessive (8.4.1 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Control arm (5.3.4 (a) (i))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Rear Oil leak, but not excessive Differential (8.4.1 (a) (i))

Offside Front Inner Play in steering rack inner joint(s) ()

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Differential leaking

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Inner Play in steering rack inner joint(s) ()

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Differential leaking

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

both middle exhaust rubbers split

n/s drive shaft seal leaking

oil leak sump area

screen wash tank insecure

Central Rear Seat belt buckle not functioning as intended (7.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Inner Position lamp not working (4.2.1 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

both middle exhaust rubbers split

n/s drive shaft seal leaking

oil leak sump area

screen wash tank insecure

Front Brake pad(s) wearing thin inner (3.5.1g)

eml on

engine oil leak

gear box transfer box oil leak

middle exhaust rubbers broken

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

eml light on

Offside Front Anti-roll bar linkage has excessive play in a ball joint drop link (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

eml light on

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nearside Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

eml light on.

Offside Rear coil spring broken (2.4.C.1a)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nearside Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

eml light on.

eml light on.

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Drive shaft uj which forms part of the suspension has excessive play in a universal joint (2.4.G.4b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Rear Brake pad(s) wearing thin (3.5.1g)

eml on

tyre pressure light on

EM Light on

Brake performance not tested (3.7.A.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Service brake: efficiency below requirements (3.7.C.1a)

EM Light on

F B Pad Warning light on

Anti-lock braking system warning lamp sequence is incorrect (3.4.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Front Headlamp aim too low (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Rear registration plate character(s) incorrectly spaced (6.3.4a)