2006 Porsche 911

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Sub-frame pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Brake pipe excessively corroded metal brake pipe from rubber hose to brake caliper (1.1.11 (c))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Headlamp aim too low (1.8)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

front both side tyres in poor condition

Brake performance not tested Due to coolant leak which may cause damage (3.7.A.1)

Emissions not tested Due to coolant leak which may cause damage (7.3.A.1)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Stop lamp not working (1.2.1b)

Rear Direction indicators incorrect colour (1.4.A.2f)

Coolant leak Major leak ()

Front Both road tyre structures are starting to fail and tyres worn bald on inside edges, Recommend replacing tyres.

brake disc worn, pitted or scored, but not seriously weakened ALL brake discs (3.5.1i)

Nearside Rear Tyre worn close to the legal limit WARNING: Road tyre worn bald on inside and nail in tyre (4.1.E.1)

Rear Direction indicators slightly discoloured (1.4.A.2f)

Rear Direction indicators slightly discoloured (1.4.A.2f)

Nearside Front Steering rack gaiter insecure (2.2.D.2d)

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too high (1.8)

Rear Direction indicators slightly discoloured (1.4.A.2f)

Play in steering rack inner joint(s)

both rear tyres wearing low and on inner edges

both sides rear suspension arms have slight play in ball joints

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front Steering pivot point has slight play (2.2.B.1g)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Inner Front Steering pivot point has slight play (2.2.B.1g)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

advise n/s/f tyre worn on inner edge

advise o/s/f tyre worn on inner edge

advise slight play n/s/f rack end

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Registration plate lamp insecure (1.1.C.1c)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)