2001 Piaggio Vespa

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Offside Direction indicator flashing more than 120 times per minute (1.5.1c)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering movement slightly 'notchy' (2.2.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Steering headbearing has slight free play (2.2.2)

Front suspension assembly component excessively misaligned (2.3.1)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Brake cable badly frayed (3.2.A1b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Exhaust is leaking and excessively noisey (7.1.1b)

Nearside Rear Direction indicator not working (1.5.1c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c) DANGEROUS

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Exhaust noisy (7.1.2)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Exhaust noisy (7.1.2)

Offside Rear Exhaust mounting deteriorated. (7.1.1.c)

Front Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Front Steering headbearing has slight free play (2.2.2)