2003 Seat Arosa

Horn not working (7.7 (a))

Central Exhaust has a minor leak of exhaust gases box (6.1.2 (a))

Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pipe corroded, covered in grease or other material all pipes slightly corroded (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing slightly out of shape (5.2.3 (d) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing slightly out of shape (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner flitch/chassis (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner flitch/chassis (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Suspension arm has slight play in a pin/bush rear bush (2.4.G.2)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Suspension arm has slight play in a pin/bush rear bush (2.4.G.2)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pipe slightly corroded under bonnet (3.6.B.2c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Headlamp aim too far to the left (1.8)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Headlamp aim too low (1.8)

Front Headlamp aim too high (1.8)

Child seat fitted not allowing full inspection of adult belt

Rear number plate poor condition

Child seat fitted not allowing full inspection of adult belt

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Rear number plate poor condition

Front brake disc slightly pitted (3.5.1h)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)