2006 BMW X3

Central Front Lower Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Central Front Lower Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Drive belt excessively worn (6.1.7 (c) (i))

Front Suspension arm damaged and seriously weakened both side front arms (5.3.3 (b) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Child Seat fitted not allowing full inspection of adult belt ()

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

hand brake performance limit only just met

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

4x4 light on

Electronic stability control switch not functioning correctly (7.12 (d))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Little reserve travel on handbrake

Hand brake efficiency just achieved 17%

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake pad(s) wearing thin Inners (1.1.13 (a) (ii))

Hand brake efficiency just achieved 17%

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

O/S /F headlight washer jet missing and leaking water

Parking brake efficiency below requirements (1.4.2 (a) (i))

O/S /F headlight washer jet missing and leaking water

Items removed from driver's view prior to test ()

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Headlamp aim too high (1.8)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Items removed from driver's view prior to test ()

Items removed from driver's view prior to test ()

Rear pads low

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Rear pads low

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear coil spring incomplete (2.4.C.1a)

Offside Front Headlamp aim too low (1.8)

Rear Brake pad(s) wearing thin (3.5.1g)