2008 Honda Civic

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Windscreen washer not working (3.5 (a))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Obligatory mirror slightly loose (3.3 (b) (i))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Headlamp has a product on the light source but not seriously reducing light output both sides (4.1.4 (b))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Headlamp has a product on the light source but not seriously reducing light output both sides (4.1.4 (b))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i))

Offside Front Headlamp aim too far to the right (4.1.2 (a))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Electronic stability control warning lamp not working (7.12 (e))

Front Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Nearside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))

Suspension component corroded but not seriously weakened All (5.3.3 (b) (i))

undercover fitted obscuring some components

Front Bonnet cannot be secured in the closed position (3.1 (b) (i))

Front Electronic stability control warning lamp not working (7.12 (e))

Front Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Nearside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))

Suspension component corroded but not seriously weakened All (5.3.3 (b) (i))

undercover fitted obscuring some components

Nearside Front Front passenger door likely to open inadvertently or not remain closed (6.2.3 (b) (ii))

Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both both (4.1.4 (b))

Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Front Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

Suspension component corroded but not seriously weakened All (5.3.3 (b) (i))

undercover fitted obscuring some components

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Brake hose inappropriately repaired (3.6.A.3)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre fouling a part of the vehicle inner wheel arch liner (4.1.D.2)

Offside Front Wheel nut(s) missing (4.2.A.1e)

A/C condensor damaged

Front lower crossmember damaged

Nearside Rear position lamp(s) has a product on the lens but not adversely affecting light output entire light unit covered affecting all rear lights (1.1.A.3d)

Offside Front tyre has a deep cut around the entire circumference in tread area

Offside Rear position lamp(s) has a product on the lens but not adversely affecting light output entire light unit covered affecting all rear lights (1.1.A.3d)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

engine undertray damaged

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Both rear tyres wearing on the outer edges

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Both rear tyres wearing on the outer edges

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Stop lamp not working (1.2.1b)