2003 Subaru Forester

Headlamp lens slightly defective both (4.1.1 (b) (i))

Central Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Headlamp has a product on the lens but not seriously reducing light output Both sides (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated upper and lower (5.3.4 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Side repeater not working (4.4.1 (a) (ii))

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Front Front position lamp(s) deteriorated, but still visible from a reasonable distance both headlights (1.1.A.3d)

under trays and sill covers fitted to vehicle obscuring some components

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords both tyres cracks to cords (4.1.D.1a)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Front position lamp(s) deteriorated, but still visible from a reasonable distance both headlights (1.1.A.3d)

under trays and sill covers fitted to vehicle obscuring some components

Headlamp has a product on the lens but not seriously reducing light output Both&sides (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear tyres cut on tread parrten

Headlamp aim too high Both&sides (1.8)

Headlamp has a product on the lens but not seriously reducing light output Both&sides (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear tyres cut on tread parrten

n/s rear tyre sidewall slightly perished.

Nearside Headlamp aim too low (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)

n/s rear tyre sidewall slightly perished.

Offside Front Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

both headlamps beam patterns just met MOT requirements

unable to fully inspect front brake pads

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front registration plate deteriorated (6.3.1d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Headlamp aim too low (1.8)

Rear registration plate deteriorated (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Brake pedal anti-slip provision worn smooth (3.3.A.1b)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)