2007 Honda Cbr 125 RW-6

All direction indicators not working (4.4.1 (a) (ii))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))

Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate insecure (0.1 (a))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake caliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) DANGEROUS

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

no rear footrest at time of test

reg plate

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Registration plate not near vertical

Dipswitch does not operate immediately when selected on main beam (4.1.3 (b))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Horn not working (7.7 (a) (ii))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear reflector missing (4.8.2 (a) (ii))

Steering operation restricted in free movement from lock to lock (2.1.4 (c))

Drive chain horseshoe locking device likely to become detached (6.1.7 (j) (ii)) DANGEROUS

Chain guard missing ()

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Registration plate not near vertical

Drive chain slightly loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Exhaust silencer rubbing on swingarm.

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Exhaust mounting deteriorated. (7.1.1.c)

Offside Handlebar deformed (2.1.1b)

Horn not working (1.7.3a)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Exhaust noisy (7.1.2)

Exhaust silencer rubbing on swingarm.

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Exhaust mounting deteriorated. (7.1.1.c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Nail in rear tyre