MOT Status
ValidMileage
74,641 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rail (6.2.2 (d) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush and front bush (5.3.4 (a) (i))
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Headlamp aim unable to be tested (4.1.2 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Brake fluid warning lamp illuminated level low (1.1.10 (f))
Central Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rail (6.2.2 (d) (i))
Central heat shield insecure
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush and front bush (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Sub frame mouting (5.3.6 (a) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive Axle mount (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension component mounting prescribed area damaged but not considered excessive Sub frame mouting (5.3.6 (a) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mount (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Sub frame mouting (5.3.6 (a) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive Axle mount (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension component mounting prescribed area damaged but not considered excessive Sub frame mouting (5.3.6 (a) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mount (5.3.6 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Tyre slightly damaged/cracking or perishing ALL 4 TYRES (5.2.3 (d) (ii))
Front Windscreen washer not working (3.5 (a))
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Both front tyre treads cracked
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Slight imbalance front brakes
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LL08 GPZ is a 2008 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 78.9%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying LL08 GPZ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of LL08 GPZ?
You can check the full history of LL08 GPZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LL08 GPZ registered?
LL08 GPZ is a 2008 Ford Ka, first registered on 29 May 2008.
Is LL08 GPZ safe to buy?
The MOT history for LL08 GPZ shows 19 tests with a 78.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LL08 GPZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LL08 GPZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.