2008 Honda Accord

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Inner Brake pad(s) wearing thin both raer (1.1.13 (a) (ii))

Front Brake disc worn, but not excessively SLIGHTLY LIPPED EDGED (1.1.14 (a) (i))

Front Outer Tyre worn close to legal limit/worn on edge EDGES - BOTH FRONT (5.2.3 (e))

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Brake performance unable to be tested (1.2.1 (g))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Tyre worn close to legal limit/worn on edge Both Tyres (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Items removed from driver's view prior to test ()

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Items removed from driver's view prior to test ()

Offside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

handbrake leaver has slight travel

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge Also Has a cut but not deep enough to reach the ply or cords. 5.2.3 (d) (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Brake pad(s) wearing thin Both front (3.5.1g)

Brake pad(s) wearing thin Both front (3.5.1g)

Offside Registration plate lamp not working (1.1.C.1d)

Items removed from driver's view prior to test ()

Nearside front tyre wearing on inner edge

Brake pedal anti-slip provision incomplete (3.3.A.1b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Items removed from driver's view prior to test ()

Nearside front tyre wearing on inner edge

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in front tyre

nearside front tyre wearing on inner edge

nearside rear light unit contains water

Brake pedal anti-slip provision incomplete (3.3.A.1b)

Power steering fluid level below minimum (2.3.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in front tyre

nearside front tyre wearing on inner edge

nearside rear light unit contains water

Brake pedal rubber wearing

Nail in nearside rear tyre

O/S/F Tyre wearing on inner edge

Brake performance not tested (3.7.A.1)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Service brake: efficiency below requirements (3.7.B.7)

offside front tyre wearing on edges

Brake hydraulic reservoir cap missing (3.6.G.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

offside front tyre wearing on edges