2012 BMW 123

Coil spring corroded all (5.3.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Handbrake cables in poor condition

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Coil spring corroded all (5.3.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Handbrake cables in poor condition

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Tyre worn close to legal limit/worn on edge both low (5.2.3 (e))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Tyre worn close to legal limit/worn on edge both low (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate inscription illegible (0.1 (b))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

brake warning light illuminated on intstrument panel

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components