2004 Jaguar X-type

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Park brake lazy on application requires attention just met limits

Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement "D" Bush **borderline** (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated **borderline** (5.3.4 (b) (i))

Offside Front Upper Anti-roll bar linkage ball joint has slight play **borderline** (5.3.4 (a) (i))

Offside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement "D" Bush **borderline** (5.3.4 (a) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened **borderline** (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened **borderline** (5.3.3 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bushe (5.3.4 (a) (i))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Lower Seat belt anchorage prescribed area is corroded but not considered excessive both sills (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

oil leak from engine area

Nearside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Lower Seat belt anchorage prescribed area is corroded but not considered excessive both sills (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

oil leak from engine area

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Oil leak

Nearside Headlamp aim too low (1.8)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

both front tyres wearing on inner edge

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

offside front tyre no tread on inner edge