2006 BMW X3

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Brake pad(s) less than 1.5 mm thick all-round (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Central Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Windscreen wiper blade defective both (3.4 (b) (i))

Windscreen washer not working (3.5 (a))

Nearside Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt BOOT SPLIT (5.3.4 (b) (ii))

Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt BOOT SPLIT (5.3.4 (b) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

T.P.M. lamp on.

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Offside Rear coil spring broken (2.4.C.1a)

Items removed from driver's view prior to test

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Items removed from driver's view prior to test

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)