2006 Volkswagen Beetle

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush , Both sides , splitting and perishing (5.3.4 (a) (i))

Nearside Non obligatory mirror damaged ()

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both sides (2.1.3 (g) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Emissions unable to be completed (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps Both sides (4.7.1 (b) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush , Both sides , splitting and perishing (5.3.4 (a) (i))

Nearside Non obligatory mirror damaged ()

Nearside Windscreen wiper blade defective wiper arm loose (3.4 (b) (i))

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both sides (2.1.3 (g) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear brake bindind

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear brake bindind

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Offside Rear Brake pad(s) wearing thin inner pad (3.5.1g)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Registration plate lamp not working (1.1.C.1d)

registration plate character(s) incorrectly spaced (6.3.4a)

Offside Rear Brake pad(s) wearing thin inner pad (3.5.1g)

front discs and pads worn

offside rear tyre worn

Offside Registration plate lamp not working (1.1.C.1d)

rear tyres wearing on inner edges

Engine covers fitted obscuring some components in the engine bay

inbalance on front foot brake

near side front tyre worn on inner edge

off side front inner brake disc face in poor condition

front brake discs slightly pitted

n/s/f and o/s/f tyres worn on inner edges close to 1.6mm

Offside Front brake disc slightly scored (3.5.1h)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front brake disc slightly scored (3.5.1h)