2010 BMW 116

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Inner Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Offside Front Shock absorbers has light misting of oil quite bad (5.3.2 (b))

Rear Shock absorbers has light misting of oil both and shrouds adrift too (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Brake pad(s) worn down to wear indicator Warning lamp on (1.1.13 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Fluid leak, but not excessive Coolant leak (8.4.1 (a) (i))

Items removed from driver's view prior to test Hanging from rear view mirror ()

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive From engine (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Tyre pressure monitoring lamp on

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Emissions not tested engine running rough (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Other passenger door cannot be opened from outside the vehicle bonnet will not open (6.2.3 (a))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin would need further investigation (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Rear Brake pad(s) wearing thin would need further investigation (1.1.13 (a) (ii))

fuel cap rubber seal starting to perish

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

engine covers and undertrays fitted obscuring components

fuel cap seal starting to split

engine covers and undertrays fitted obscuring components

fuel cap seal starting to split

Nearside Front Tyre has ply or cords exposed 205/50/17 (4.1.D.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

engine covers and undertrays fitted obscuring components

fuel cap seal starting to split

both front tyres perishing in treads

both front tyres wearing on outer edge

engine covers and undertrays fitted obscuring components

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

both front tyres perishing in treads

both front tyres wearing on outer edge

engine covers and undertrays fitted obscuring components

both front tyres wearing on outer edges

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Headlamp aim too low (1.8)

Under-trays fitted obscuring some underside components