MOT Status
ExpiredMileage
102,419 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Brake pad(s) wearing thin very close to legal limt (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Rear Seat belt retracting mechanism defective (7.1.2 (e))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords side wall (5.2.3 (d) (i))
Nearside Rear Brake pad(s) wearing thin very close to legal limt (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
coolant level low
Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear tyres worn 2/3mm
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Nail in tyre ()
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
offside rear seat belt retract function is intermittently does not work, it is strongly advised that it is rectified.
brake fluid level sensor is deteriorated.
rear pads/disc low
slightly engine oil leak
Nearside Rear Direction indicators incorrect colour (1.4.A.2f)
rear pads/disc low
slightly engine oil leak
Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
oil smear around back of engine
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Direction indicators slightly discoloured (1.4.A.2f)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Direction indicators slightly discoloured (1.4.A.2f)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Audi A3?
Based on 7,415,025 MOT tests across 593,922 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LM53 CNC is a 2003 Audi A3 in Black with a 1,984cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 81%.
Across all 2003 Audi A3 models, the average MOT pass rate is 71.6% with a typical mileage of 92,659 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Audi A3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 173,142 recorded failures. If you're considering buying LM53 CNC, it's worth having these areas checked by a mechanic before committing.
The Audi A3 typically stays on UK roads for around 29 years. At 23 years old, this Audi A3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of LM53 CNC?
You can check the full history of LM53 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LM53 CNC registered?
LM53 CNC is a 2003 Audi A3, first registered on 18 December 2003.
Is LM53 CNC safe to buy?
The MOT history for LM53 CNC shows 21 tests with a 81% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LM53 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LM53 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.