2004 Mercedes-benz C

Age Related Underbody Surface Corrosion

Front Headlamp has a product on the light source but not seriously reducing light output nsf osf (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement nsr osr (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

complete under body cover panels fitted concealing some testable components.

engine cover & under body cover panels fitted obscuring some testable components.

sill cover body panels fitted preventing full inspection of some testable components.

Front Headlamp has a product on the light source but not seriously reducing light output both sides. (4.1.4 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer side wall. (5.2.3 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge. (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge. (5.2.3 (e))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all components. (5.3.3 (b) (i))

complete under body cover panels fitted concealing some testable components.

engine cover & under body cover panels fitted obscuring some testable components.

sill cover body panels fitted preventing full inspection of some testable components.

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer side wall. (5.2.3 (d) (i))

complete under body cover panels fitted concealing some testable components.

engine cover & under body cover panels fitted obscuring some testable components.

sill cover body panels fitted preventing full inspection of some testable items.

surface corrosion to exhaust system.

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play thrust arm (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

engin ecovers under trays fitted

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Registration plate inscription illegible dirty (0.1 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play thrust arm (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

engin ecovers under trays fitted

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

complete under cover body panels fitted concealing some testable components.

engine cover & under cover panels fitted obscuring some testable components.

sill cover panels fitted preventing inspection of some testable items.

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Headlamp aim too far to the left (4.1.2 (a))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Rear Brake pipe excessively corroded front to rear. (1.1.11 (c))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

complete under cover body panels fitted concealing some testable components.

engine cover & under cover panels fitted obscuring some testable components.

sill cover panels fitted preventing inspection of some testable items.

Nearside Front Lower Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

carried out vehicle inspection under wet conditions.

complete under body cover panels fitted concealing some testable components.

engine cover & under cover fitted obscuring some testable components.

Exhaust has a minor leak of exhaust gases middle box (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both rear D bushes (5.3.4 (a) (i))

engine covers and undertrays fitted

general underbody corrosion

oil dampness to engine

complete under body panels fitted concealing some testable components.

engine cover & under cover fitted obscuring some testable components.

plastic sill covers fitted preventing full inspection of lower sills.

surface corrosion to exhaust system.

Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Parking brake efficiency below requirements both sides. (1.4.2 (a) (i))

complete under body panels fitted concealing some testable components.

engine cover & under cover fitted obscuring some testable components.

plastic sill covers fitted preventing full inspection of lower sills.

surface corrosion to exhaust system.

engine cover fitted & under covers fitted obscuring some testable components.

engine cover fitted

surface corrosion to exhaust system

under cover fitted

Engine covers fitted obscuring some components in the engine bay

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Under-trays fitted obscuring some underside components

both front tyres wearing on inner edges

sill cover fitted

surface corrosion to exhaust

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

slight play in steering rack

sill covers fitted

u/body covers fitted

Windscreen washer provides insufficient washer liquid (8.2.3)

sill and under body covers fitted

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front brake pads appear low