2013 Peugeot 208

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

vehicle fitted with under trays and other cover / guards obscuring view to components / structure

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

vehicle fitted with under trays and other cover / guards obscuring view to components / structure

Rear Brakes imbalanced across an axle 54% (1.2.1 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension arm damaged but not seriously weakened cut mark but not deep (5.3.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Exhaust mounting defective badly corroded (6.1.2 (a))

handbrake travel near limit

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pad(s) wearing thin appear very low (1.1.13 (a) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Exhaust mounting defective badly corroded (6.1.2 (a))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Wearing outer edge (5.2.3 (e))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge Wearing outer edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing Perishing through tread (5.2.3 (d) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Floor pan and chassis Nearside and Offside (5.3.6 (a) (i))

Central Exhaust mounting defective silencer mounting detached, system secure (6.1.2 (a))

Nearside Rear Nail in tyre

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Subframe and spring mountings (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Subframe and spring mountings (5.3.6 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Central Exhaust system not adequately supported (7.1.1)

Offside Rear Nail in tyre