2003 Toyota Yaris

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

VEHICLE HEAVILY UNDERSEALED

Boot lid component damaged and likely to cause injury Boot struts not holding lid open (6.2.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Headlamp aim projected beam image is obviously incorrect No pattern on either headlamp- headlamps opaque (4.1.2 (c))

Nearside Front Brake hose excessively deteriorated Flexi hose split (1.1.12 (b) (ii))

Nearside Rear Brake hose excessively deteriorated Flexi hose split (1.1.12 (b) (ii))

Nearside Rear Brake pipe excessively corroded Front to rear feeding flexi hose (1.1.11 (c))

Offside Front Brake hose excessively deteriorated Flexi hose split (1.1.12 (b) (ii))

Offside Rear Brake hose excessively deteriorated Flexi hose split (1.1.12 (b) (ii))

Offside Rear Brake pipe excessively corroded Front to rear feeding flexi hose (1.1.11 (c))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Front arm rear bushes split (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material All remaining steel (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate deteriorated but not likely to be misread Both. (0.1 (b))

Various body damage but no sharp edges.

Vehicle structure is corroded but structural rigidity is not significantly reduced Vehicle underside. (6.1.1 (c) (i))

Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Emissions unable to be completed exhaust holed (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

corrosion to underside and suspension components front and rear

perishing to suspension bushes front and rear

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

corrosion to underside and suspension components front and rear

perishing to suspension bushes front and rear

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Wiper inop

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Front Anti-roll bar linkage pin or bush excessively worn Both. (5.3.4 (a) (i))

Headlamp aim too low Both. (4.1.2 (a))

Nearside Rear Body panel damaged and likely to cause injury (6.2.1 (a) (i))

Rear Wiper inop

Brake hose has slight corrosion to ferrule All. (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material All remaining steel. (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Anti-roll bar linkage pin or bush excessively worn Both. (5.3.4 (a) (i))

Headlamp aim projected beam image is obviously incorrect Both. (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake hose has slight corrosion to ferrule All. (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material All remaining steel. (1.1.11 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Both (5.1.2 (b) (i))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Nearside Headlamp has less than 1/2 LEDs not functioning (4.1.1 (a) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front tyre worn on outer edges

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front tyre worn on outer edges

Centre Stop lamp not working (1.2.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)