2004 Ford Focus C-max

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits too high (8.2.1.2 (a))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside rear sill damaged

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside reverse light not working

Vehicles internal headlight adjuster altered to recheck lights ()

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside reverse light not working

Vehicles internal headlight adjuster altered to recheck lights ()

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Macpherson strut ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen washer not working (3.5 (a))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

n/s f tyre worn on inner edge

Nearside Headlamp aim so that beam "kick up" is not visible on the screen (1.8.B.1)

Offside Headlamp aim so that beam "kick up" is not visible on the screen (1.8.B.1)

n/s f tyre worn on inner edge

n/s/f suspension top mount noise

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

n/s/f suspension top mount noise

both front tyres worn on inner edge

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

both front tyres worn on inner edge

noise from n/s/f strut top mount

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

noise from n/s/f strut top mount

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

both front tyres close to limits

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)