2011 Peugeot 107

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Brake pipe excessively corroded after ferrules short line (1.1.11 (c))

Offside Side repeater not working (4.4.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bushes both sides (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))

Rear Shock absorbers has slight external damage to the casing both sides corroded (5.3.2 (b))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material both rear (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material both rear (1.1.11 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement n/s and o/s (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement n/s and o/s rear (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output n/s and o/s (4.1.4 (b))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake pipe corroded, covered in grease or other material n/s and o/s (1.1.11 (c))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement n/s and o/s (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement n/s and o/s rear (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge n/s and o/s (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material n/s and o/s (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front both lower arm rear bushes deteruioted

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

both front lower arm rear bushes cracking

both front tyres bald on edges

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Side repeater not working (4.4.1 (a) (ii))

both front lower arm rear bushes cracking

both front tyres bald on edges

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Registration plate lamp not working (1.1.C.1d)