2002 Husqvarna SM125S

Front mugaurd missing

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Chain guard missing

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

clutch lever perch broken

Headlamp deteriorated but function not impaired (1.2.3a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain excessively loose (6.2.1d)

Steering movement slightly 'notchy' (2.2.1b)

Brake pedal has inadequate reserve travel (3.1.3b)

Brake pedal pivots excessively worn (3.1.3a)

Direction indicators flashing less than 60 times a minute (1.5.1c)

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Headlamp switch faulty (1.2.4)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

Front Headlamp aim beam image kick up to the offside (1.6)

Front Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Rear Brake performance not tested (3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Tyre worn close to the legal limit (4.1.3(ii))

left hand bar grip loose almost to excess