2008 Mercedes-benz Clk

Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c))

Headlamp has a product on the lens so that the light output is severely reduced Both sides (4.1.4 (b))

Nearside Front Anti-roll bar linkage pin or bush excessively worn "D" bush excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn Bendy arm rear bush excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn "D" bush excessively worn (5.3.4 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Lower Suspension arm pin or bush excessively worn Bendy arm rear bush excessively worn (5.3.4 (a) (i))

Offside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Central Front Shock absorbers has light misting of oil (5.3.2 (b))

Front Suspension arm ball joint has slight play BOTH (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

centre brake light not working

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

centre brake light not working

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

vehicle has covers fitted unable to see certain testable items

Nearside Front Lower Suspension arm ball joint excessively worn rear ball joint (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn rear ball joint (5.3.4 (a) (i))

vehicle has covers fitted unable to see certain testable items

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Nearside Headlamp aim too high (1.8)

Under-trays fitted obscuring some underside components

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)