2008 Chevrolet Aveo

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill at rear (6.1.1 (c) (i))

center exhaust box corroded

Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill at rear (6.1.1 (c) (i))

center exhaust box corroded

Central centre exhaust box corroded

Integral body structure is corroded but structural rigidity is not significantly reduced rear off nearside outer sill (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

front pads require checking

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inside wall (5.2.3 (d) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Brakes imbalanced across an axle by more than 50% Axle 2 (1.2.1 (b) (ii)) DANGEROUS

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Inner Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Front Inner Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear rear brake binding (3.7.B.1)

Offside Rear rear brake binding (3.7.B.1)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)