2009 Honda Cr-v

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear shocker casing rusty

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened mainly around front mounting areas (5.3.3 (b) (i))

rear exhaust mounting joint rusty

Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear shocker casing rusty

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened mainly around front mounting areas (5.3.3 (b) (i))

rear exhaust mounting joint rusty

Brake pedal wearing smooth anti-slip rubber worn on edge too metal (1.1.2 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Headlamp levelling device inoperative control rod broken (4.1.5 (a))

Brake pedal wearing smooth anti-slip rubber worn on edge too metal (1.1.2 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pedal wearing smooth Worn thru to metal. (1.1.2 (c))

Front Brake disc worn, but not excessively Both. (1.1.14 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output Both. (4.1.4 (b))

Nearside Front Outer Ball joint was missing a split pin. Rectified.

Nearside Rear Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both. (1.1.14 (a) (ii))

Whilst driving and turning there is a clonking noise from drive shafts(possible) (needs investigating)

Offside Rear Nail in tyre ()

Brake pedal wearing smooth anti-slip rubber worn on edge too metal (1.1.2 (c))

Engine bay covers obscuring testable components & prescribed areas

Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Outer sill covers obscuring some prescribed areas

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Under covers obscuring testable components

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Testable items obscured by under trays

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front both lower ball joint rubbers perished

Front both outer track rod end rubbers perished

Rear Brake pad(s) wearing thin wearing low (1.1.13 (a) (ii))

Rear diff unit judder

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

exhaust centre section heavily corroded on joints

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust centre section heavily corroded on joints

Front Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Front Brake pad(s) wearing thin (3.5.1g)