2011 Vauxhall Vivaro

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside front bumper/ wing damaged

Nearside rear light unit damaged

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Rear suspension components corroded

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Headlamp lens seriously defective no beam pattern (4.1.1 (b) (ii))

Nearside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Offside Headlamp lens seriously defective no beam pattern (4.1.1 (b) (ii))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside front bumper/ wing damaged

Nearside rear light unit damaged

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Rear suspension components corroded

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded Short pipe from rear flexi (1.1.11 (c))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 2 cuts (5.2.3 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Coil spring corroded Both (5.3.1 (b) (i))

Nearside Front Headlamp lens slightly defective Cloudy and only just met requirements (4.1.1 (b) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))

Nearside Rear Direction indicator lens defective which has no effect on emitted light Broken (4.4.1 (b) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Chassis leg within 30cm of suspension mounting and towbar mounting (6.2.2 (d) (i))

Offside Front Headlamp lens slightly defective Cloudy and only just met requirements (4.1.1 (b) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Chassis leg within 30cm of suspension mounting and towbar mounting (6.2.2 (d) (i))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Rear Macpherson strut corroded but not seriously weakened Both (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Towbar component corroded, but not excessively (6.1.6 (a))

Central Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Nearside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Central Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Hazard warning switch faulty (4.4.2 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Spare tyre defective

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Parking brake lever ratchet mechanism obviously worn (1.1.6 (b) (i))

Spare tyre defective

Hazard warning switch inoperative (4.4.2 (a) (ii))

Offside Front Headlamp aim not tested due to bulb not working (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Upper Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nail in nearside rear tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)