2013 Yamaha Yzf

Exhaust noisy (8.1.1 (a))

Headlamp aim too high (4.1.2 (a))

Offside Direction indicator not working (4.4.1 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Suspension component attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Position lamp incorrect colour purple (4.2.3 (a) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake caliper slightly damaged but function not impaired (1.1.16 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Brake excessively binding (1.2.1 (f))

Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Nearside Direction indicator not working (4.4.1 (a) (ii))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Suspension arm pin or bush excessively worn rear shock linkage lower bush (5.3.4 (a) (i))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Exhaust noisy exhaust baffle fitted (8.1.1 (a))

Front Position lamp incorrect colour purple light (4.2.3 (a) (i))

Rear Brake caliper slightly damaged but function not impaired rear brake caliper mounting plate (1.1.16 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Exhaust noisy (8.1.1 (a))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Drive chain slightly loose Unable to adjust chain as adjusters seized (6.1.7 (c) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Exhaust noisy (7.1.2)